Lenco 9" x 12" Edge Mount Trim Tab Kit w/LED Indicator Switch Kit [TT9X12EI]
- Product SKU: CWR-56426
- Category: Boat Outfitting, Boat Outfitting - Trim Tabs, Lenco Marine
- Order within
Edge Mount Trim Tab Kit w/LED Indicator Switch Kit
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Suggested Boat Length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Kit Contents
- 2 each of 12-gauge stainless steel trim tab blades
- 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
- 2 each of #30133-103 20' actuator extension wiring harnesses
- 2 each of #15085-001 (116) upper mounting brackets with gland seal
- 2 each of #50014-001 (119) lower mounting brackets
- 1 each of the Lenco owner's / installation manual
- All necessary stainless steel mounting hardware
Specifications:
-
Blades: 12 Gauge Stainless Steel
-
Finish:Smooth
-
Class: Fuel Efficient
- Compliance: CE Certified
- Compatibility: Any Boat
LED Indicator Switch Kit
With Built-In Retractor & Self-Check Features For Single Actuator Systems / 12 & 24-Volt
Lenco Waterproof Trim Tab Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.
The standard tactile switch is built to all the same exacting standards as the indicator switches.
Kit Contents
- Self-contained sealed Key Pad
- Control box
- 36" Power Pigtail.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.Specifications:
- Construction: Stainless Steel
- Box Dimensions: 3"H x 5"W x 10"L WT: 18.85 lbs
Edge Mount Trim Tab Kit w/LED Indicator Switch Kit
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Suggested Boat Length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Kit Contents
- 2 each of 12-gauge stainless steel trim tab blades
- 2 each of #15054-001 actuator with 6' leads & Deutsch plugs
- 2 each of #30133-103 20' actuator extension wiring harnesses
- 2 each of #15085-001 (116) upper mounting brackets with gland seal
- 2 each of #50014-001 (119) lower mounting brackets
- 1 each of the Lenco owner's / installation manual
- All necessary stainless steel mounting hardware
Specifications:
-
Blades: 12 Gauge Stainless Steel
-
Finish:Smooth
-
Class: Fuel Efficient
- Compliance: CE Certified
- Compatibility: Any Boat
LED Indicator Switch Kit
With Built-In Retractor & Self-Check Features For Single Actuator Systems / 12 & 24-Volt
Lenco Waterproof Trim Tab Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.
The standard tactile switch is built to all the same exacting standards as the indicator switches.
Kit Contents
- Self-contained sealed Key Pad
- Control box
- 36" Power Pigtail.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.Specifications:
- Construction: Stainless Steel
- Box Dimensions: 3"H x 5"W x 10"L WT: 18.85 lbs
Return & Refund Policy
 Thank You for shopping at Shop CDN Marine.
 If you are not entirely satisfied with your purchase, we are here to help you.
Â
 Manufacturer Support
 Before you return your item, many manufacturers have extensive service centers that can support most product issues. If you need help reaching a manufacturer contact us: ShopCDN@cdnmarine.com
Â
Returns
 You have 20 calendar days to return an item from the date you received it.
 To be eligible for a return, your item must be un-opened and in its original packaging.
 You must present the original receipt or proof of purchase at the time of the return.
 We will not be able to accept returns on special order items.
 Return Merchandise Authorization (RMA) numbers are required for all returns.
To obtain an RMA number, please send an email to: ShopCDN@cdnmarine.com
Â
You can make returns right to our to store.
 In-store returns can be made at 303 Brennan Concourse Bayville NJ, 08721. You must have proof of purchase and RMA number prior to visiting store.
Â
 Refunds
 Once your item is received at the store will notify you of its arrival. It will inspected to make sure it meets all return/refund requirements. Shortly after we will be able to notify you on the status of your refund.
 If your return is approved, we will initiate a refund to your credit card (or original method of payment).
 The time frame of when you receive your refund back to your card is contingent on the individual banking/credit institutions and not at the discretion of CDN Marine.
Â
 Shipping
 You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
 If you receive a refund, the cost of original shipping will be deducted from your refund.
Â
Â
 Contact Us
 If you have any questions on how to return your item to us, contact us at: ShopCDN@cdnmarine.comÂ
Â