Furuno BBDS1 Network Fishfinder
The BBDS1 is a network fish finder for NavNet 3D and NavNet TZtouch that features an updated bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness.
Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds, boosting your catch.
There are two bottom discrimination display modes to select from, Standard Mode and Probability Mode. In Standard Mode, the most probable materials on the bottom (mud, sand, gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display.
Because bottom material can change frequently and can sometimes be difficult to identify, Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar.
Standard Features
- Frequency: 50/200 kHz alternately transmitted
- Output Power: 600 W/1 kW
- Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW)
- Temperature : -15° to +55° C (in operation)
- Relative Humidity: 93% at 40°C
- Waterproofing: IP20 (not waterproofed)
Required Conditions for Bottom Discrimination
- Detection Range: 5-100M
- Boat Speed: 0-10 kn
- Transducer mounting: Thru-hull or transom mount only
- MFD8/12/BB software: v2.06 or later
Notes:
- The result shown by this function may sometimes be different from the actual bottom components.
- For best performance, do not use in-hull mounted transducers with the BBDS1.
- The BBDS1 may show an incorrect ground discrimination result, especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom.
- Materials such as shell, coral, or a sunken ship are indicated as the most similar material from the four bottom categories:mud, sand, gravel, or rock, according to reflected echoes.
- Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.)
- The BBDS1 is not compatible with NavNet 1 or NavNet vx2.
- Appropriate Furuno Transducer recommended for best results
Bottom Discrimination Transducers below:
520-5PSD
520-5MSD
525-5PWD
525STID-MSD
525STID-PWD
CA50/200-IT
CA50/200-12MThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Furuno BBDS1 Network Fishfinder
The BBDS1 is a network fish finder for NavNet 3D and NavNet TZtouch that features an updated bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness.
Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds, boosting your catch.
There are two bottom discrimination display modes to select from, Standard Mode and Probability Mode. In Standard Mode, the most probable materials on the bottom (mud, sand, gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display.
Because bottom material can change frequently and can sometimes be difficult to identify, Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar.
Standard Features
- Frequency: 50/200 kHz alternately transmitted
- Output Power: 600 W/1 kW
- Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW)
- Temperature : -15° to +55° C (in operation)
- Relative Humidity: 93% at 40°C
- Waterproofing: IP20 (not waterproofed)
Required Conditions for Bottom Discrimination
- Detection Range: 5-100M
- Boat Speed: 0-10 kn
- Transducer mounting: Thru-hull or transom mount only
- MFD8/12/BB software: v2.06 or later
Notes:
- The result shown by this function may sometimes be different from the actual bottom components.
- For best performance, do not use in-hull mounted transducers with the BBDS1.
- The BBDS1 may show an incorrect ground discrimination result, especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom.
- Materials such as shell, coral, or a sunken ship are indicated as the most similar material from the four bottom categories:mud, sand, gravel, or rock, according to reflected echoes.
- Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.)
- The BBDS1 is not compatible with NavNet 1 or NavNet vx2.
- Appropriate Furuno Transducer recommended for best results
Bottom Discrimination Transducers below:
520-5PSD
520-5MSD
525-5PWD
525STID-MSD
525STID-PWD
CA50/200-IT
CA50/200-12MThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Return & Refund Policy
 Thank You for shopping at Shop CDN Marine.
 If you are not entirely satisfied with your purchase, we are here to help you.
Â
 Manufacturer Support
 Before you return your item, many manufacturers have extensive service centers that can support most product issues. If you need help reaching a manufacturer contact us: ShopCDN@cdnmarine.com
Â
Returns
 You have 20 calendar days to return an item from the date you received it.
 To be eligible for a return, your item must be un-opened and in its original packaging.
 You must present the original receipt or proof of purchase at the time of the return.
 We will not be able to accept returns on special order items.
 Return Merchandise Authorization (RMA) numbers are required for all returns.
To obtain an RMA number, please send an email to: ShopCDN@cdnmarine.com
Â
You can make returns right to our to store.
 In-store returns can be made at 303 Brennan Concourse Bayville NJ, 08721. You must have proof of purchase and RMA number prior to visiting store.
Â
 Refunds
 Once your item is received at the store will notify you of its arrival. It will inspected to make sure it meets all return/refund requirements. Shortly after we will be able to notify you on the status of your refund.
 If your return is approved, we will initiate a refund to your credit card (or original method of payment).
 The time frame of when you receive your refund back to your card is contingent on the individual banking/credit institutions and not at the discretion of CDN Marine.
Â
 Shipping
 You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
 If you receive a refund, the cost of original shipping will be deducted from your refund.
Â
Â
 Contact Us
 If you have any questions on how to return your item to us, contact us at: ShopCDN@cdnmarine.comÂ
Â